1 Bluetooth Instruction
Before installing The Mini Diffuser, you will need to download The Aroma Haus app to your Apple or Android device. Once you have completed Step 1 of the Bluetooth Installation, plug in the device to customize the scenting schedule.
Step 1
Search for the “Aroma Haus” app in the Google Play
or Apple App Store, or scan the QR code below to download.
​
Note: Make sure the Bluetooth function of your mobile phone is enabled.
Step 2
Open the Aroma Haus app and select BLE connect mode.
Select your device and enter the default password 8888.
Step 3
Click on the three dots (…) in the upper right corner of the device control page to enter device settings. Here you change the device name and label of your scent diffuser and update your password.
Note: If you forget the password to your device. Press the reset button on your device to restore factory settings and use the default password 8888.
Step 4
Click “Adding a scheduled task +” to choose the days you would like your diffuser to run, the start and end times, and also the interval in which the fragrance is released (grade).
Note: The higher the grade number, the more fragrance that will be released over time. You can select the “Customize” option to customize your fragrance load. (fragrance pause and release times)
​
Press the toggle button next to a schedule in the Smart scenario list to turn on/off any schedule.
2 Diffuser Installation
Step 1
Lift up the diffuser head with the attached bottle to remove it from the diffuser.​
Step 2
Twist the diffuser head off of the bottle and fill the bottle with fragrance oil.​
Step 3
After adding the fragrance oil, tighten the bottle to the diffuser head.
Step 4
Replace the diffuser head and bottle back into the machine and plug the diffuser into a wall outlet.
%20(1).png)
3 Manual Programing
If you do not have access to Bluetooth or decide not to use Bluetooth, please follow the instructions below to program your diffuser.
Grade Button
Short Press & Beep: Cycles through scent intensity levels (1, 2, 3)
​
Long press (3 seconds) & Long Beep: Resets to factory settings.​
Mode Button
Short Press & Beep: Cycles through timer modes (3H, 6H, Smart (Bluetooth), Off
​
-
3H Timer: Unit will cycle for 3 hours, and then enter standby mode for the next 21 hours
​ -
6H Timer: Unit will cycle for 6 hours, and then enter standby mode for the next 18 hours
-
Smart Indicator: Lights up when Bluetooth is connected and working.
You will hear multiple beeps when setting up the device, which indicates a successful Bluetooth connection.
In this mode, you can customize your scenting schedule.
-
Off Indicator: Red light will light up.
​​
When the machine is running, you will see a blue (running) or yellow (standby) light, and no light next to the grade button.
4 Troubleshooting
Does Not Diffuse
-
Check to see if the diffuser is in a non-working period.
-
Air pump may be damaged. Replace the air pump.
-
Check to see if the atomizer tube is loose
​
Low Diffuse
-
The atomizing core is blocked. Clean with alcohol or change to a new atomizing core.
-
Check to see if the gasket is damaged, loose, or missing.
-
Check to see if the atomizer tube is loose or not connected.
​
Oil Spill
-
Check to see if the bottle is loose.
-
Check to see if the gasket in the atomizer head is damaged, loose, or missing.
​
Oil Sprinkle
-
The atomizer head is damaged. Replace the atomizer head.
-
The machine is tilted or lying flat. Keep the diffuser vertical.
​
Abnormal Noise
-
The air pump is loose. Retighten the pump.
-
The air pump is damaged. Replace the pump.
5 Warning
Do not modify, disassemble, or repair the diffuser. If any failure occurs, please contact our customer service team - hello@thearomahaus.com
​
The machine must always be kept vertical. If the machine is tilted or lying flat, fragrance spillage will occur, and the machine efficiency may be affected.
​
6 Equipment Maintenance
The diffuser needs to be cleaned once a month or when:
1. You are changing to a different fragrance
2. The atomization volume becomes weak
Step 1
Remove the atomizer head (with tube attached) from the device.
Step 2
Soak the atomizer head (with tube attached) in industrial alcohol for 5-10 minutes
Step 3
Allow the piece to dry before returning to the device for use.