1 Bluetooth Instruction
Before installing The Haus Diffuser, you will need to download The Aroma Haus app to your Apple or Android device. Once you have completed Step 1 of the Bluetooth Installation, plug in the device to customize the scenting schedule.
Step 1
Search for the “Aroma Haus” app in the Google Play
or Apple App Store, or scan the QR code below to download.
​
Note: Make sure the Bluetooth function of your mobile phone is enabled.
Step 2
Open the Aroma Haus app and select BLE connect mode.
Select your device and enter the default password 8888.
Step 3
Click on the three dots (…) in the upper right corner of the device control page to enter device settings. Here you change the device name and label of your scent diffuser and update your password.
Note: If you forget the password to your device. Press the reset button on your device to restore factory settings and use the default password 8888.
Step 4
Click “Adding a scheduled task +” to choose the days you would like your diffuser to run, the start and end times, and also the interval in which the fragrance is released (grade).
Note: The higher the grade number, the more fragrance that will be released over time. You can select the “Customize” option to customize your fragrance load. (fragrance pause and release times)
​
Press the toggle button next to a schedule in the Smart scenario list to turn on/off any schedule.
2 Diffuser Installation
Step 1
Locate the HVAC Quick Connector piece and the sealing tape included within the Haus Diffuser packaging.
​
Wrap the sealing tape around the thread of the HVAC Quick Connector 3-5 times to prevent air leakage.
​​​
Step 2
Screw the HVAC Quick Connector onto the Haus Diffuser.
Note: You will need to remove the silver nozzle at the top of the machine. This nozzle is there incase you do not want to scent via your HVAC and simply want the scent to disperse from the top of the machine.
​​
Step 3
Once the HVAC Quick Connector is secured to the top of the equipment, press down on the quick connector and insert the fragrance tube (included in the Haus Diffuser packaging) into the Quick Connector.
Step 4
Insert the fragrance tube into the air conditioning duct (after the coils) and secure with duct tape.
​
Note: Do not insert the fragrance tube into your equipment before the coils. Our fragrances are only designed to disperse into the air ducts to scent through air vents that are serviced by those ducts.
Step 5
To install the fragrance canister, pull open the magnetic panel on the front of diffuser to insert the fragrance oil canister.
​​
Step 6
Screw the fragrance canister into the diffuser and tighten so that it is secure.
​
Note: Keep the equipment vertical at all times when a fragrance bottle is installed to prevent leakage.
Step 7
Reattached the magnetic panel to the front of the diffuser
​​
3 LCD Touch Panel Instructions for Manual Set-Up
Power On
Connect to power supply and turn on the power switch. The power indicator light will turn on first. You will hear a “beep” sound when the air pump starts.
​
The Bluetooth/Wifi indicator light will turn on and the initial time and current grade (fragrance load) will be displayed on the LCD screen.
​
Note: The Haus Diffuser can be set up and operated completely through The Aroma Haus app. These instructions are for those who do not wish to operate via an app and prefer program settings directly into the equipment.
Power Off
Unplug from the power source or turn off the power switch. The air pump will turn off and the power screen will go black simultaneously.
Lock/Unlock
If there are no program selections within 60 seconds, the LCD screen will automatically lock and go black, and the buttons will be ineffective.
​
Press and hold the SET button for 3 seconds. The machine will unlock and the LCD screen will light up again.
Initial Time Setting
Press and hold the SET button (5 seconds) until you hear the “beep” sound of the air pump entering the time adjustment interface.
​
Press the up or down arrow buttons to select the current working day.
​
Press the ENT button to enter the current working period
​
Then, press the SET button to confirm.
Scent Intensity
There are a total of 20 grades (scent levels) to choose from. Press the up arrow button to increase the fragrance load intensity, or press the down arrow button to decrease the fragrance load intensity.
Working Periods
There are a total of 5 working periods that can be set here. Press the SET button to enter the first working period (ON/OFF1). Press the up or down arrow button to adjust the time, and press the ENT button to enter the next setting area.
After the first working period (ON/OFF1) is set, you will need to assign the day(s) that you would like this working period to apply to.
​
Press the ENT button to mover to Mon. Then press the up arrow button to turn on this working period for Monday. The right side of the screen will show (ON1) to indicate this working period has been successfully applied.
​
If you would like to turn off this working period, press the down arrow button and you will see (OFF1) appear on the right side of the screen.
​
Press the ENT button to move to the next day. Repeat the instructions above to program each day’s working periods.
​
When finished, press the SET button to confirm and exit the setting interface.
​
Note: The Haus Diffusers factory default 1 working period is set to turn on at 7:00 and turn off at 21:00. The remaining working periods are all set to operate 24 hours.
4 Troubleshooting
No Mist or Weak Mist
1. The atomizing core is clogged.
-
Run alcohol through the system to remove internal residue or replace the atomizing core with a new one. (Recommended cleaning every 6 months)
​
2. The liquid tube is not securely attached.
-
Check and tighten the liquid tube.
​
3. The gasket between the diffuser head and bottle may be loose or damaged.
-
Secure the bottle properly or replace the gasket if damaged.
Oil Leakage
1. The bottle is not properly secured
-
Check and tighten the loose parts
​
2. The gasket between the diffuser head and bottle may be loose or damaged.
-
Secure the bottle properly or replace the gasket if damaged.
​
3. The equipment is not placed upright. The diffuser must be sitting upright or the fragrance liquid will leak from the device.
Liquid Spray
1. The atomizing core is clogged
-
Clean the atomizing core with rubbing alcohol. Then fill an empty fragrance bottle halfway with rubbing alcohol and running the machine to remove internal residue.
-
If this does not work, replace the atomizing core.
​
2. The equipment is tilted. Ensure the device remains upright during use.
​
3. The fragrance oil level is too high.
-
​Do not overfill the fragrance oil bottle. The bottle should only be filled to 90% capacity (1000 ml) for optimal results.
Unusual Noise
1. The air pump is not secure.
-
Inspect and re-secure the pump if loose.
​
2. The essential oil level is too high.
-
Do not overfill the fragrance oil bottle. The bottle should only be filled to 90% capacity (1000 ml) for optimal results.
5 Warning
Do not modify, disassemble, or repair the equipment. If any failure occurs, please contact our customer service team - hello@thearomahaus.com
The optimal operating temperature for this machine is 68-95 degrees Fahrenheit with a relative humidity of <85%. Performance may vary depending on environmental temperature and humidity. Avoid extreme tempuratures.
Keep away from fire sources.
​
Do not ingest fragrance oil; seek medical attention if swallowed. Do not apply fragrance oil to your skin.
​
Do not use for purposes other than scented space diffusion.
​
The machine must always be kept vertical. If the machine is tilted or lying flat, pil will overflow and the machine efficiency may be affected
​
Keep out of reach of children or pets.
​
Do not get the machine or charging port wet. Do not overload power outlets, or used damaged cords or faulty plugs. These actions may cause electric shock, short circuits, or fire hazards.
​
Do not pull, crush, cut, or tamper with the power cord.
​
Only use The Aroma Haus fragrance oils with this equipment.
​
6 Equipment Maintenance
The diffuser needs to be cleaned every 6 months or when:
1. You are changing to a different fragrance
2. The atomization volume becomes weak
Step 1
Remove the atomizer head (with tube attached) from the device.
Step 2
Soak the atomizer head (with tube attached) in industrial alcohol for 5-10 minutes
Step 3
Allow the piece to dry before returning to the device for use.
NOTE: After cleaning the device, turn on the unit and press and hold the "SET" button for 3 seconds to reset the device for the remaining oil level.
7 FCC Statement
This device complies with part 15 of the FCC Rules. Operations is subject to the following two conditions:
-
This device may not cause harmful interference, and
-
this device must accept any interference received, including interference that may cause undesired operation.
​
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to to try to correct the interference by one or more of the following measures:
-
Reorient or relocate the following receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different to which the receiver is connected.
-
Consult the the dealer or an experienced radio/TV technician for help.
​
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. ​
​
RF Exposer
​
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
8 ISED Statement
This device contains license-exempt transmitter(s)/receiver(s) that comply with innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
-
This device may not cause interference.
-
This device must accept any interference, including interference that may cause undesired operation of the device.
​
The digital apparatus complies with Canadian KAN ICES-3(B)/NMB-3(B).
​
This device meets the exemption from the routine evaluation limits in section 6.3 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
​
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.
​
This equipment should be installed and operated with minimum distance 20cm radiator and your body.